Friday, January 21, 2011

EqcoLogic ships Ethernet (IP) over coax adaptors (FastECoax7501) with PoE

BRUSSELS, BELGIUM & DALLAS, USA: EqcoLogic is shipping its new Ethernet over 75-Ohm coaxial cable adaptors for IP camera and Networked Video Recorder (NVR) systems. The adaptors consist of a transmitter (master) and receiver (slave) set, which send Ethernet signalling over coaxial cable with Power over Ethernet (PoE) and Power over Coax (PoC) support.

The adaptors (FastECoax7501M and FastECoax7501S) use EqcoLogic’s EQCO875SC transceiver circuit enabling full duplex 100BaseT communication together with power transmission over a single, low cost coaxial (COAX) cable. They support up to 240 meters of Coax cable, depending on type and quality.

EqcoLogic’s Ethernet IP adaptor is ideal for industrial and security cameras where IP cameras and Network Video Recorders (NVR) have rapidly growing shares of the CCTV market. Normally, an IP camera using CAT 5 cable can only support lengths up to 100 meters. With the EQCO875SC circuit, low-cost, long haul connections can be made even using pre-existing coax infrastructure. This allows the conversion of existing analog camera and video server systems (using 75 ohm COAX cabling) to digital with no need to re-install cable.

“One of the barriers to IP camera and NVR adoption is the requirement to change out cabling from coaxial to CAT5/CAT6. There are millions of miles of existing installed coaxial cable used for analog cameras and digital video recorders (DVR). We are enabling IP camera system installers to utilize existing coaxial cable without having to incur the expense to change out cable to add digital capability,” said Zeph Freeman, VP Business Development for EqcoLogic. “Our solution allows NVR (and Hybrid) systems and Ethernet switches to send PoE and PoC for powering remote cameras and devices.”

EQCO875SC supports key protocols including Ethernet (fast and gigabit), IEEE 1394b (Firewire) and LVDS. Markets include security, industrial, automotive and factory automation where the EQCO875SC enables high performance and low cost networking with coax cables.

The FastECoax7501M (Master) and the FastECoax7501S (Slave) are priced at $88.00 ($176 for the pair) for small order quantities. Volume discounts are available.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.